Instrumentation and Process Control > Introduction to Process Measurement and Control

Introduction to Process Measurement and Control

Course Number: 771

The Introduction to Process Measurement and Control textbook explains the function of basic devices for measuring and controlling different kinds of variables in process control. It introduces closed-loop control, PID functions, analog and digital devices, and programmable logic controllers (PLCs). It also covers ISA and SAMA instrumentation symbols and the interpretation and use of process diagrams.

Does your curriculum require additional topics not included in this textbook?  Build a customized version of the Introduction to Process Measurement and Control textbook below.

This textbook has been recently updated
to include topics lists, objectives, & key terms for every chapter.

Recommended Contact Hours – 9

Preview a Chapter

Preview a Chapter

  • Table of Contents
  • My Custom Book
  • Exam Copies
  • Suggested Titles

Table of Contents

Chapter 1: The Nature of Process Control

Topics: Process variables; On-off control; Measuring data; Controlling variables, Error and feedback; Open- and closed-loop control

Learning Objectives:

  • Define setpoint and error.
  • Explain how measurement and control are related in industrial processes.
  • Describe the four essential functions of an automatic control system.
  • Discuss the functions of the CRT and PLC in control systems.
  • Identify variables in industrial processes.
  • Explain the importance of feedback in a closed-loop control system.

Chapter 2: Elements of Process Control

Topics: Analog and digital control signals; ASCII; Measuring pressure, level, and flow rate; Digital pulse control; System terminology; Controller action

Learning Objectives:

  • Discuss the differences between modern automatic control systems and older ones.
  • Identify the standard signals used in process control.
  • Define the terms commonly used in control terminology.
  • Explain the differences between open-loop control and closed-loop control.
  • Describe on-off, proportional, integral, derivative, and PID controller action.

Chapter 3: Process Control Signals

Topics: Linear and nonlinear transducers; Signal operating values; Error; Controller output; Pneumatic and electrical signal transmission; Control loops

Learning Objectives:

  • Discuss standard signals and linearity and explain how to calculate the value of a variable from an instrument's span and range.
  • Describe five common sources of error in signal measurement.
  • Discuss the basic principles governing pneumatic signal transmission and explain how a flapper-nozzle device works.
  • Describe the function of the controller in a control loop.
  • Discuss the basic principles governing electrical signal transmission, including Ohm's law, and list standard current and voltage signals.
  • Explain the function of I/P devices in a typical control system and discuss the use of digital signals and optical signals.

Chapter 4: Process Measurement Fundamentals

Topics: Measurement and display requirements; Remote and local display; Calibration; Noise; Response time; Measurement system and observation error

Learning Objectives:

  • Explain why measurement is necessary and discuss conditions that affect the degree of accuracy required.
  • Compare the advantages of linear and nonlinear displays.
  • Compare analog and digital devices and explain how each is applied to measurement.
  • Name five sources of measurement error.

Chapter 5: Principles of Transducer Operation

Topics: Outputs; Mechanical, electrical, and pneumatic elements and response; Resistance, voltage, and frequency devices; Combining elements

Learning Objectives:

  • Discuss the need for linearity in a process.
  • List examples of mechanical and electrical transducer elements.
  • Compare pneumatic response and electrical/electronic response in transducers.
  • Describe the operation of the bourdon tube, bellows, and diaphragm.
  • Name examples of resistance, voltage response, frequency response, and electromechanical devices and explain how they work.

Chapter 6: Basic Process Measurement Systems

Topics: Interaction of system elements; Transmitters; Electrical vs. pneumatic output; Converters; Signal conditioning; Indicators and recorders

Learning Objectives:

  • Discuss the basic elements of measuring systems and explain how they interact.
  • Describe how a physical quantity is translated into another quantity.
  • Discuss the use of transmitters to relay information from one location to another and explain the transfer function.
  • Describe the operation of at least five kinds of converters.

Add Chapters to Your Custom Book

Select Chapter(s):

  •    Chapter 1: The Nature of Process Control
  •    Chapter 2: Elements of Process Control
  •    Chapter 3: Process Control Signals
  •    Chapter 4: Process Measurement Fundamentals
  •    Chapter 5: Principles of Transducer Operation
  •    Chapter 6: Basic Process Measurement Systems

My Custom Book

    Create a custom book that contains only the training content that your students need to succeed

    Our topics cover a broad and diverse spectrum of subject matter, from reading blueprints to electrical schematics, measurement to rigging and safety, material handling to welding, and everything in between! Choose only the lessons that meet your specific curriculum requirements.

    Request Exam Copies

    Exam Copies

    Ready to see a copy of our textbooks? After selecting which textbooks you’d like to review for your course, you can submit your request by either logging in or creating an account so we know where to ship your exam copies. A representative from Schoolcraft will contact you to confirm and finish processing your request.

    Exam copies are always free and yours to keep.

    Selected Exam Copies

      none selected

      * Maximum of five copies can be ordered


                    





         





      750 W. Lake Cook Road, Buffalo Grove, Illinois 60089   ●   Phone: 800.837.1255   ●   © 2018 Schoolcraft Publishing, a TPC Training Company