Instrumentation and Process Control > Pressure Measurement

Pressure Measurement

Course Number: 773

The Pressure Measurement textbook defines the units of pressure and discusses Boyle's and Charles' laws to explain relationships among pressure, volume, and temperature. It describes sensor operation of manometers, bourdon tubes, diaphragms, and bellows. It explains the operation of potentiometric, capacitive, reluctive, servo, strain-gauge, and piezoelectric transducers. Devices used in low-pressure control are also covered. The textbook concludes with proper and safe methods for installing and servicing pressure instruments.

Does your curriculum require additional topics not included in this textbook?  Build a customized version of the Pressure Measurement textbook below.

This textbook has been recently updated
to include topics lists, objectives, & key terms for every chapter.

Recommended Contact Hours – 8

Preview a Chapter

Preview a Chapter

  • Table of Contents
  • My Custom Book
  • Exam Copies
  • Suggested Titles

Table of Contents

Chapter 1: Principles of Pressure in Liquids and Gases

Topics: Properties of matter; Units of pressure; Density; Specific gravity, Gauge, absolute, and atmospheric pressure; Pressure and flow

Learning Objectives:

  • Compare the three forms of matter.
  • Define pressure and explain the difference between gauge pressure and absolute pressure.
  • Discuss the conditions that affect the pressure of a liquid.
  • Describe how changes in volume affect the pressure of a gas at a constant temperature.
  • Describe how changes in temperature affect the volume of a gas at constant pressure, and the pressure of a gas with a constant volume.
  • Discuss the two causes of pressure drop in a pipe carrying liquid from a tank.

Chapter 2: Pressure Sensors

Topics: Manometers; Bourdon tubes; Diaphragm sensor construction and capsule elements; Bellows sensors; Maintaining accuracy; Calibration

Learning Objectives:

  • Explain how a manometer works.
  • Describe four kinds of bourdon-tube sensors.
  • Discuss construction details of bourdon tubes, diaphragms, and bellows.
  • Explain how bellows pressure sensors work.
  • Describe how calibration may be accomplished and list the steps in calibrating a pressure gauge.
  • Explain how normally open and normally closed pressure switches work.

Chapter 3: Pressure Transducers

Topics: Pressure conversion; Potentiometric pressure transducers; P/I, P/P, reluctive, servo, strain-gauge, and piezoelectric transducers; Response

Learning Objectives:

  • Discuss the advantages and disadvantages of the potentiometric pressure transducer.
  • Explain how a P/I transducer works.
  • Describe the operation of capacitive, reluctive, and servo pressure transducers.
  • Compare the three kinds of strain gauge pressure transducers.
  • Describe the operation and advantages of the piezoelectric pressure transducer.
  • Discuss three environmental conditions that can affect transducer operation.

Chapter 4: Low-Pressure Measurement

Topics: Low pressure; Methods of conversion; sP transmitters, Pressure, slack-diaphragm, ionization, McLeod, thermal conductivity, Pirani, and thermocouple gauges

Learning Objectives:

  • Define the pressure unit torr and calculate pressure in specified units when given the pressure in other units.
  • Explain the operation of a differential-pressure transmitter and a slack-diaphragm gauge.
  • Name two kinds of ionization gauges and describe how they work.
  • Explain how the McLeod gauge works.
  • Describe the capacitance manometer.
  • Compare the operation of the Pirani gauge and the thermocouple gauge.

Chapter 5: Installation and Service

Topics: Pressure transmitter components; Piping, connections, and fittings; Wiring; Guidelines for periodic maintenance; Calibration; Safety

Learning Objectives:

  • List the components of a pressure-transmitter installation.
  • Compare methods of joining pipes and other instrumentation components.
  • Describe the procedure for placing a pressure instrument into service.
  • Discuss the elements of periodic maintenance.
  • Explain how to calibrate pressure instruments with electrical and pneumatic outputs.
  • Describe three important techniques used in troubleshooting and repair.
  • List five important safety rules.

Add Chapters to Your Custom Book

Select Chapter(s):

  •    Chapter 1: Principles of Pressure in Liquids and Gases
  •    Chapter 2: Pressure Sensors
  •    Chapter 3: Pressure Transducers
  •    Chapter 4: Low-Pressure Measurement
  •    Chapter 5: Installation and Service

My Custom Book

    Create a custom book that contains only the training content that your students need to succeed

    Our topics cover a broad and diverse spectrum of subject matter, from reading blueprints to electrical schematics, measurement to rigging and safety, material handling to welding, and everything in between! Choose only the lessons that meet your specific curriculum requirements.

    Request Exam Copies

    Exam Copies

    Ready to see a copy of our textbooks? After selecting which textbooks you’d like to review for your course, you can submit your request by either logging in or creating an account so we know where to ship your exam copies. A representative from Schoolcraft will contact you to confirm and finish processing your request.

    Exam copies are always free and yours to keep.

    Selected Exam Copies

      none selected

      * Maximum of five copies can be ordered


                    





         





      750 W. Lake Cook Road, Buffalo Grove, Illinois 60089   ●   Phone: 800.837.1255   ●   © 2018 Schoolcraft Publishing, a TPC Training Company